View B32529C1473_4649353.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

film capacitors metallized polyester film capacitors (mkt) series/type: b32520 ... b32529 date: october 2011 ? epcos ag 2011. reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited.
typical applications blocking coupling, decoupling bypassing rfi for automotive climatic max. operating temperature: 125 c climatic category (iec 60068-1): 55/125/56 construction dielectric: polyethylene terephthalate (polyester, pet) stacked-film technology for lead spacing 5 to 15 mm = code c, d or e in digit 7 of ordering code wound capacitor technology for lead spacing 10 to 37.5 mm = code n, q or r in digit 7 of ordering code plastic case (ul 94 v-0) epoxy resin sealing (ul 94 v-0) features high pulse strength high contact reliability terminals parallel wire leads, lead-free tinned special lead lengths available on request marking manufacturer's logo, rated capacitance (coded), cap. tolerance (code letter), rated dc voltage, date of manufacture (coded), coded type ("1") for lead spacing 5 mm, series and lot number for lead spacing 3 10 mm delivery mode bulk (untaped) taped (ammo pack or reel) for notes on taping, refer to chapter "taping and packing". dimensional drawing dimensions in mm lead spacing 0.4 lead diameter d 1 type 1) 0.5 mm for capacitor width w = 4 mm 5.0 0.5 b32529 7.5 0.5 b32520 10.0 0.6 1) b32521 15.0 0.8 b32522 22.5 0.8 b32523 27.5 0.8 b32524 37.5 1.0 b32526 metallized polyester film capacitors (mkt) b32520 ... b32529 general purpose (stacked/wound) page 2 of 45 please read important notes at the end of this document.
overview of available types technology: s = stacked-film technology / w = wound capacitor technology lead spacing 5.0 mm 7.5 mm 10.0 mm type b32529 b32520 b32521 page 6 10 12 technology s s s s s s s s s s s s s s v r (v dc) 63 100 250 400 630 63 100 250 400 63 100 250 400 630 v rms (v ac) 40 63 160 200 400 40 63 160 200 40 63 160 200 200 c r ( m f) 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 b32520 ... b32529 general purpose (stacked/wound) page 3 of 45 please read important notes at the end of this document.
overview of available types technology: s = stacked-film technology / w = wound capacitor technology lead spacing 15.0 mm 22.5 mm 27.5 mm type b32522 b32523 b32524 page 14 17 18 technology s s/w s/w s w s w w w w w w w w w w v r (v dc) 63 100 250 400 450 630 63 100 250 400 630 63 100 250 400 630 v rms (v ac) 40 63 160 200 200 200 40 63 160 200 200 40 63 160 200 220 c r ( m f) 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 b32520 ... b32529 general purpose (stacked/wound) page 4 of 45 please read important notes at the end of this document.
overview of available types technology: s = stacked-film technology / w = wound capacitor technology lead spacing 37.5 mm type b32526 page 20 technology w w w w v r (v dc) 63 100 250 400 v rms (v ac) 40 63 160 200 c r ( m f) 3.3 4.7 5.6 6.8 8.2 10 15 22 33 47 56 68 82 100 150 220 b32520 ... b32529 general purpose (stacked/wound) page 5 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 63 40 0.0010 2.5 6.5 7.2 b32529c0102+*** 12800 11200 8000 0.0015 2.5 6.5 7.2 b32529c0152+*** 12800 11200 8000 0.0022 2.5 6.5 7.2 b32529c0222+*** 12800 11200 8000 0.0033 2.5 6.5 7.2 b32529c0332+*** 12800 11200 8000 0.0047 2.5 6.5 7.2 b32529c0472+*** 12800 11200 8000 0.0068 2.5 6.5 7.2 b32529c0682+*** 12800 11200 8000 0.010 2.5 6.5 7.2 b32529c0103+*** 12800 11200 8000 0.015 2.5 6.5 7.2 b32529c0153+*** 12800 11200 8000 0.022 2.5 6.5 7.2 b32529c0223+*** 12800 11200 8000 0.033 2.5 6.5 7.2 b32529c0333+*** 12800 11200 8000 0.047 2.5 6.5 7.2 b32529c0473+*** 12800 11200 8000 0.068 2.5 6.5 7.2 b32529c0683+*** 12800 11200 8000 0.10 2.5 6.5 7.2 b32529c0104+*** 12800 11200 8000 0.15 2.5 6.5 7.2 b32529c0154+*** 12800 11200 8000 0.22 2.5 6.5 7.2 b32529c0224+*** 12800 11200 8000 0.33 3.0 6.5 7.2 b32529c0334+*** 10800 9600 8000 0.47 3.5 8.0 7.2 b32529c0474+*** 9200 8000 8000 0.68 4.5 9.5 7.3 b32529c0684+*** 7200 6000 6000 1.0 4.5 9.5 7.3 b32529c0105+*** 7200 6000 6000 1.5 6.0 10.5 7.5 b32529c0155+*** 5200 4400 4000 2.2 7.8 13.0 7.8 b32529d0225+*** 4000 3200 4000 3.3 7.8 13.0 7.8 b32529d0335+*** 4000 3200 4000 4.7 7.8 13.0 7.8 b32529d0475m*** 4000 3200 4000 b32529 general purpose (stacked) page 6 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 100 63 0.0010 2.5 6.5 7.2 b32529c1102+*** 12800 11200 8000 0.0015 2.5 6.5 7.2 b32529c1152+*** 12800 11200 8000 0.0022 2.5 6.5 7.2 b32529c1222+*** 12800 11200 8000 0.0033 2.5 6.5 7.2 b32529c1332+*** 12800 11200 8000 0.0047 2.5 6.5 7.2 b32529c1472+*** 12800 11200 8000 0.0068 2.5 6.5 7.2 b32529c1682+*** 12800 11200 8000 0.010 2.5 6.5 7.2 b32529c1103+*** 12800 11200 8000 0.015 2.5 6.5 7.2 b32529c1153+*** 12800 11200 8000 0.022 2.5 6.5 7.2 b32529c1223+*** 12800 11200 8000 0.033 2.5 6.5 7.2 b32529c1333+*** 12800 11200 8000 0.047 2.5 6.5 7.2 B32529C1473+*** 12800 11200 8000 0.068 2.5 6.5 7.2 b32529c1683+*** 12800 11200 8000 0.10 2.5 6.5 7.2 b32529c1104+*** 12800 11200 8000 0.15 3.0 6.5 7.2 b32529c1154+*** 10800 9600 8000 0.22 3.5 8.0 7.2 b32529c1224+*** 9200 8000 8000 0.33 3.5 8.0 7.2 b32529c1334+*** 9200 8000 8000 0.47 4.5 9.5 7.3 b32529c1474+*** 7200 6000 6000 0.68 6.0 10.5 7.5 b32529c1684+*** 5200 4400 4000 1.0 7.8 13.0 7.8 b32529d1105+*** 4000 3200 4000 b32529 general purpose (stacked) page 7 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 250 160 0.0010 2.5 6.5 7.2 b32529c3102+*** 12800 11200 8000 0.0015 2.5 6.5 7.2 b32529c3152+*** 12800 11200 8000 0.0022 2.5 6.5 7.2 b32529c3222+*** 12800 11200 8000 0.0033 2.5 6.5 7.2 b32529c3332+*** 12800 11200 8000 0.0047 2.5 6.5 7.2 b32529c3472+*** 12800 11200 8000 0.0068 2.5 6.5 7.2 b32529c3682+*** 12800 11200 8000 0.010 2.5 6.5 7.2 b32529c3103+*** 12800 11200 8000 0.015 2.5 6.5 7.2 b32529c3153+*** 12800 11200 8000 0.022 2.5 6.5 7.2 b32529c3223+*** 12800 11200 8000 0.033 3.0 6.5 7.2 b32529c3333+*** 10800 9600 8000 0.047 3.5 8.0 7.2 b32529c3473+*** 9200 8000 8000 0.068 4.5 9.5 7.3 b32529c3683+*** 7200 6000 6000 0.10 4.5 9.5 7.3 b32529c3104+*** 7200 6000 6000 0.15 5.0 10.0 7.5 b32529c3154+*** 6400 5600 6000 0.22 7.8 13.0 7.8 b32529d3224+*** 4000 3200 4000 0.33 7.8 13.0 7.8 b32529c3334+*** 4000 3200 4000 0.47 7.8 13.0 7.8 b32529c3474+*** 4000 3200 4000 b32529 general purpose (stacked) page 8 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 400 200 0.0010 2.5 6.5 7.2 b32529c6102+*** 12800 11200 8000 0.0015 2.5 6.5 7.2 b32529c6152+*** 12800 11200 8000 0.0022 2.5 6.5 7.2 b32529c6222+*** 12800 11200 8000 0.0033 2.5 6.5 7.2 b32529c6332+*** 12800 11200 8000 0.0047 2.5 6.5 7.2 b32529c6472+*** 12800 11200 8000 0.0068 2.5 6.5 7.2 b32529c6682+*** 12800 11200 8000 0.010 3.0 6.5 7.2 b32529e6103+*** 10800 9600 8000 0.015 3.0 6.5 7.2 b32529e6153+*** 10800 9600 8000 0.022 3.5 8.0 7.2 b32529e6223+*** 9200 8000 8000 0.033 4.5 9.5 7.3 b32529e6333+*** 7200 6000 6000 0.047 4.5 9.5 7.3 b32529e6473+*** 7200 6000 6000 0.068 6.0 10.5 7.5 b32529e6683+*** 5200 4400 4000 0.10 7.8 13.0 7.8 b32529e6104+*** 4000 3200 4000 0.15 7.8 13.0 7.8 b32529e6154+*** 4000 3200 4000 630 400 0.0010 2.5 6.5 7.2 b32529c8102+*** 12800 11200 8000 0.0015 2.5 6.5 7.2 b32529c8152+*** 12800 11200 8000 0.0022 2.5 6.5 7.2 b32529c8222+*** 12800 11200 8000 0.0033 3.5 8.0 7.2 b32529c8332+*** 9200 8000 8000 0.0047 3.5 8.0 7.2 b32529c8472+*** 9200 8000 8000 0.0068 3.5 8.0 7.2 b32529c8682+*** 9200 8000 8000 0.010 5.0 10.0 7.5 b32529c8103+*** 6400 5600 6000 0.015 5.0 10.0 7.5 b32529c8153+*** 6400 5600 6000 0.022 7.8 13.0 7.8 b32529c8223+*** 5200 4400 4000 0.033 7.8 13.0 7.8 b32529c8333+*** 4000 3200 4000 b32529 general purpose (stacked) page 9 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 7.5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 63 40 0.068 2.5 7.0 10.0 b32520c0683+*** 12800 11200 10000 0.10 2.5 7.0 10.0 b32520c0104+*** 12800 11200 10000 0.15 2.5 7.0 10.0 b32520c0154+*** 12800 11200 10000 0.22 2.5 7.0 10.0 b32520c0224+*** 12800 11200 10000 0.33 2.5 7.0 10.0 b32520c0334+*** 12800 11200 10000 0.47 3.0 8.0 10.0 b32520c0474+*** 10400 9600 8000 0.68 4.0 8.5 10.0 b32520c0684+*** 8000 7200 6000 1.0 5.0 10.5 10.0 b32520c0105+*** 6400 5600 4000 1.5 5.0 10.5 10.0 b32520c0155+*** 6400 5600 4000 2.2 6.0 12.0 10.3 b32520c0225+*** 5200 4400 3000 100 63 0.047 2.5 7.0 10.0 b32520c1473+*** 12800 11200 10000 0.068 2.5 7.0 10.0 b32520c1683+*** 12800 11200 10000 0.10 2.5 7.0 10.0 b32520c1104+*** 12800 11200 10000 0.15 3.0 8.0 10.0 b32520c1154+*** 10400 9600 8000 0.22 3.0 8.0 10.0 b32520c1224+*** 10400 9600 8000 0.33 4.0 8.5 10.0 b32520c1334+*** 8000 7200 6000 0.47 5.0 10.5 10.0 b32520c1474+*** 6400 5600 4000 0.68 6.0 12.0 10.3 b32520c1684+*** 5200 4400 3000 1.0 6.0 12.0 10.3 b32520c1105+*** 5200 4400 3000 250 160 0.015 2.5 7.0 10.0 b32520c3153+*** 12800 11200 10000 0.022 2.5 7.0 10.0 b32520c3223+*** 12800 11200 10000 0.033 2.5 7.0 10.0 b32520c3333+*** 12800 11200 10000 0.047 2.5 7.0 10.0 b32520c3473+*** 12800 11200 10000 0.068 3.0 8.0 10.0 b32520c3683+*** 10400 9600 8000 0.10 4.0 8.5 10.0 b32520c3104+*** 8000 7200 6000 0.15 5.0 10.5 10.0 b32520c3154+*** 6400 5600 4000 0.22 6.0 12.0 10.3 b32520c3224+*** 5200 4400 3000 b32520 general purpose (stacked) page 10 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 7.5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 400 200 0.0010 2.5 7.0 10.0 b32520c6102+*** 12800 11200 10000 0.0015 2.5 7.0 10.0 b32520c6152+*** 12800 11200 10000 0.0022 2.5 7.0 10.0 b32520c6222+*** 12800 11200 10000 0.0033 2.5 7.0 10.0 b32520c6332+*** 12800 11200 10000 0.0047 2.5 7.0 10.0 b32520c6472+*** 12800 11200 10000 0.0068 2.5 7.0 10.0 b32520c6682+*** 12800 11200 10000 0.010 2.5 7.0 10.0 b32520c6103+*** 12800 11200 10000 0.015 3.0 8.0 10.0 b32520e6153+*** 10400 9600 8000 0.022 3.0 8.0 10.0 b32520e6223+*** 10400 9600 8000 0.033 4.0 8.5 10.0 b32520e6333+*** 8000 7200 6000 0.047 4.0 8.5 10.0 b32520e6473+*** 8000 7200 6000 0.068 5.0 10.5 10.0 b32520e6683+*** 6400 5600 4000 0.10 5.0 10.5 10.0 b32520e6104+*** 6400 5600 4000 0.15 6.0 12.0 10.3 b32520e6154+*** 5200 4400 3000 b32520 general purpose (stacked) page 11 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 10 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 63 40 0.47 4.0 7.0 13.0 b32521c0474+*** 4000 6800 4000 0.68 4.0 7.0 13.0 b32521c0684+*** 4000 6800 4000 1.0 4.0 9.0 13.0 b32521c0105+*** 4000 6800 4000 1.5 5.0 11.0 13.0 b32521c0155+*** 3320 5200 4000 2.2 5.0 11.0 13.0 b32521c0225+*** 3320 5200 4000 3.3 6.0 12.0 13.0 b32521c0335+*** 2720 4400 4000 100 63 0.10 4.0 7.0 13.0 b32521c1104+*** 4000 6800 4000 0.15 4.0 7.0 13.0 b32521c1154+*** 4000 6800 4000 0.22 4.0 7.0 13.0 b32521c1224+*** 4000 6800 4000 0.33 4.0 7.0 13.0 b32521c1334+*** 4000 6800 4000 0.47 4.0 9.0 13.0 b32521c1474+*** 4000 6800 4000 0.68 5.0 11.0 13.0 b32521c1684+*** 3320 5200 4000 1.0 6.0 12.0 13.0 b32521c1105+*** 2720 4400 4000 250 160 0.033 4.0 7.0 13.0 b32521c3333+*** 4000 6800 4000 0.047 4.0 7.0 13.0 b32521c3473+*** 4000 6800 4000 0.068 4.0 7.0 13.0 b32521c3683+*** 4000 6800 4000 0.10 4.0 7.0 13.0 b32521c3104+*** 4000 6800 4000 0.15 4.0 9.0 13.0 b32521c3154+*** 4000 6800 4000 0.22 5.0 11.0 13.0 b32521c3224+*** 3320 5200 4000 0.33 5.0 11.0 13.0 b32521c3334+*** 3320 5200 4000 0.47 6.0 12.0 13.0 b32521c3474+*** 2720 4400 4000 400 200 0.010 4.0 7.0 13.0 b32521e6103+*** 4000 6800 4000 0.015 4.0 7.0 13.0 b32521e6153+*** 4000 6800 4000 0.022 4.0 7.0 13.0 b32521e6223+*** 4000 6800 4000 0.033 4.0 7.0 13.0 b32521e6333+*** 4000 6800 4000 0.047 4.0 9.0 13.0 b32521e6473+*** 4000 6800 4000 0.068 4.0 9.0 13.0 b32521e6683+*** 4000 6800 4000 0.10 5.0 11.0 13.0 b32521e6104+*** 3320 5200 4000 0.15 6.0 12.0 13.0 b32521e6154+*** 2720 4400 4000 b32521 general purpose (stacked/wound) page 12 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 10 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 630 200 0.010 4.0 9.0 13.0 b32521d8103+*** 6800 4000 0.015 5.0 11.0 13.0 b32521d8153+*** 6800 4000 0.022 5.0 11.0 13.0 b32521d8223+*** 5200 4000 0.033 6.0 12.0 13.0 b32521d8333+*** 5200 4000 b32521 general purpose (stacked/wound) page 13 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 15 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq ? wound capacitor technology moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 63 40 0.68 5.0 10.5 18.0 b32522c0684+*** 4680 5200 4000 1.0 5.0 10.5 18.0 b32522c0105+*** 4680 5200 4000 1.5 5.0 10.5 18.0 b32522c0155+*** 4680 5200 4000 2.2 5.0 10.5 18.0 b32522c0225+*** 4680 5200 4000 3.3 6.0 11.0 18.0 b32522c0335+*** 3840 4400 4000 4.7 7.0 12.5 18.0 b32522c0475+*** 3320 3600 4000 6.8 8.5 14.5 18.0 b32522c0685+*** 2720 2800 2000 10 9.0 17.5 18.0 b32522c0106+*** 2560 2800 2000 100 63 0.33 5.0 10.5 18.0 b32522c1334+*** 4680 5200 4000 0.47 5.0 10.5 18.0 b32522c1474+*** 4680 5200 4000 0.68 5.0 10.5 18.0 b32522c1684+*** 4680 5200 4000 1.0 5.0 10.5 18.0 b32522c1105+*** 4680 5200 4000 1.0 ? 6.0 11.0 18.0 b32522q1105+*** 3840 4400 4000 1.5 6.0 11.0 18.0 b32522c1155+*** 3840 4400 4000 1.5 ? 7.0 12.5 18.0 b32522q1155+*** 3320 3600 4000 2.2 7.0 12.5 18.0 b32522c1225+*** 3320 3600 4000 2.2 ? 8.5 14.5 18.0 b32522q1225+*** 2720 2800 2000 3.3 8.5 14.5 18.0 b32522c1335+*** 2720 2800 2000 3.3 ? 9.0 17.5 18.0 b32522q1335+*** 2560 2800 2000 4.7 9.0 17.5 18.0 b32522c1475+*** 2560 2800 2000 4.7 ? 11.0 18.5 18.0 b32522q1475+*** 2200 1200 b32522 general purpose (stacked/wound) page 14 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 15 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq ? wound capacitor technology moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 250 160 0.10 5.0 10.5 18.0 b32522c3104+*** 4680 5200 4000 0.15 5.0 10.5 18.0 b32522c3154+*** 4680 5200 4000 0.22 5.0 10.5 18.0 b32522c3224+*** 4680 5200 4000 0.33 5.0 10.5 18.0 b32522c3334+*** 4680 5200 4000 0.47 6.0 11.0 18.0 b32522c3474+*** 3840 4400 4000 0.68 7.0 12.5 18.0 b32522c3684+*** 3320 3600 4000 1.0 8.5 14.5 18.0 b32522c3105+*** 2720 2800 2000 1.0 ? 8.5 14.5 18.0 b32522n3105+*** 2720 2800 2000 1.5 9.0 17.5 18.0 b32522c3155+*** 2560 2800 2000 1.5 ? 9.0 17.5 18.0 b32522n3155+*** 2560 2800 2000 400 200 0.047 5.0 10.5 18.0 b32522e6473+*** 4680 5200 4000 0.068 5.0 10.5 18.0 b32522e6683+*** 4680 5200 4000 0.10 5.0 10.5 18.0 b32522e6104+*** 4680 5200 4000 0.15 5.0 10.5 18.0 b32522e6154+*** 4680 5200 4000 0.22 6.0 11.0 18.0 b32522e6224+*** 3840 4400 4000 0.33 7.0 12.5 18.0 b32522e6334+*** 3320 3600 4000 0.47 9.0 17.5 18.0 b32522e6474+*** 2560 2800 2000 0.68 9.0 17.5 18.0 b32522e6684+*** 2560 2800 2000 450 200 0.10 ? 5.0 10.5 18.0 b32522n6104+*** 4680 5200 4000 0.15 ? 5.0 10.5 18.0 b32522n6154+*** 4680 5200 4000 0.22 ? 6.0 11.0 18.0 b32522n6224+*** 3840 4400 4000 0.33 ? 7.0 12.5 18.0 b32522n6334+*** 3320 3600 4000 0.47 ? 8.5 14.5 18.0 b32522n6474+*** 2720 2800 2000 0.68 ? 9.0 17.5 18.0 b32522n6684+*** 2560 2800 2000 1.0 ? 11.0 18.5 18.0 b32522n6105+*** 2200 1200 b32522 general purpose (stacked/wound) page 15 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 15 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./ moq untaped pcs./ moq ? wound capacitor technology moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 630 200 0.047 5.0 10.5 18.0 b32522d8473+*** 5200 4000 0.068 6.0 11.0 18.0 b32522d8683+*** 4400 4000 0.10 7.0 12.5 18.0 b32522d8104+*** 3600 4000 0.15 8.5 14.5 18.0 b32522d8154+*** 2800 2000 0.22 9.0 17.5 18.0 b32522d8224+*** 2800 2000 b32522 general purpose (stacked/wound) page 16 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 22.5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./moq untaped pcs./moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 63 40 3.3 6.0 15.0 26.5 b32523r0335+*** 2720 2800 2880 4.7 6.0 15.0 26.5 b32523r0475+*** 2720 2800 2880 6.8 6.0 15.0 26.5 b32523r0685+*** 2720 2800 2880 10 7.0 16.0 26.5 b32523r0106+*** 2320 2400 2520 15 10.5 16.5 26.5 b32523r0156+*** 1560 1600 2160 22 12.0 22.0 26.5 b32523r0226+*** 1800 100 63 1.5 6.0 15.0 26.5 b32523q1155+*** 2720 2800 2880 2.2 6.0 15.0 26.5 b32523q1225+*** 2720 2800 2880 3.3 6.0 15.0 26.5 b32523q1335+*** 2720 2800 2880 4.7 7.0 16.0 26.5 b32523q1475+*** 2320 2400 2540 6.8 8.5 16.5 26.5 b32523q1685+*** 1960 2000 2040 10 10.5 16.5 26.5 b32523q1106+*** 1560 1600 2160 15 12.0 22.0 26.5 b32523q1156+*** 1800 250 160 0.47 6.0 15.0 26.5 b32523q3474+*** 2720 2800 2880 0.68 6.0 15.0 26.5 b32523q3684+*** 2720 2800 2880 1.0 6.0 15.0 26.5 b32523q3105+*** 2720 2800 2880 1.5 7.0 16.0 26.5 b32523q3155+*** 2320 2400 2520 2.2 10.5 16.5 26.5 b32523q3225+*** 1560 1600 2160 3.3 11.0 20.5 26.5 b32523q3335+*** 1480 1400 2040 400 200 0.22 6.0 15.0 26.5 b32523q6224+*** 2720 2800 2880 0.33 6.0 15.0 26.5 b32523q6334+*** 2720 2800 2880 0.47 7.0 16.0 26.5 b32523q6474+*** 2320 2400 2520 0.68 8.5 16.5 26.5 b32523q6684+*** 1920 2000 2040 1.0 10.5 16.5 26.5 b32523q6105+*** 1560 1600 2160 1.5 11.0 20.5 26.5 b32523q6155+*** 1480 1400 2040 630 200 0.10 6.0 15.0 26.5 b32523q8104+*** 2720 2800 2880 0.15 6.0 15.0 26.5 b32523q8154+*** 2720 2800 2880 0.22 7.0 16.0 26.5 b32523q8224+*** 2320 2400 2520 0.33 10.5 16.5 26.5 b32523q8334+*** 1560 1600 2160 0.47 10.5 20.5 26.5 b32523q8474+*** 1560 1600 2160 0.68 12.0 22.0 26.5 b32523q8684+*** 1800 b32523 general purpose (wound) page 17 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 27.5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./moq untaped pcs./moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 63 40 4.7 11.0 21.0 31.5 b32524r0475+*** 1400 1280 6.8 11.0 21.0 31.5 b32524q0685+*** 1400 1280 10 11.0 21.0 31.5 b32524r0106+*** 1400 1280 15 11.0 21.0 31.5 b32524r0156+*** 1400 1280 22 11.0 21.0 31.5 b32524r0226+*** 1400 1280 33 12.5 21.5 31.5 b32524r0336+*** 1200 1120 47 18.0 27.5 31.5 b32524r0476+*** 800 68 18.0 27.5 31.5 b32524r0686+*** 800 100 22.0 36.5 31.5 b32524r0107+*** 640 100 63 4.7 11.0 21.0 31.5 b32524q1475+*** 1400 1280 6.8 11.0 21.0 31.5 b32524q1685+*** 1400 1280 10 11.0 21.0 31.5 b32524q1106+*** 1400 1280 15 11.0 21.0 31.5 b32524q1156+*** 1400 1280 22 14.0 24.5 31.5 b32524q1226+*** 1000 1040 33 18.0 27.5 31.5 b32524q1336+*** 800 47 21.0 31.0 31.5 b32524q1476+*** 720 68 22.0 36.5 31.5 b32524q1686+*** 640 250 160 1.5 11.0 21.0 31.5 b32524q3155+*** 1400 1280 2.2 11.0 21.0 31.5 b32524q3225+*** 1400 1280 3.3 11.0 21.0 31.5 b32524q3335+*** 1400 1280 4.7 11.0 21.0 31.5 b32524q3475+*** 1400 1280 6.8 11.0 21.0 31.5 b32524r3685+*** 1400 1280 10 12.5 21.5 31.5 b32524r3106+*** 1200 1120 15 15.0 24.5 31.5 b32524r3156+*** 960 22 19.0 30.0 31.5 b32524r3226+*** 720 33 22.0 36.5 31.5 b32524r3336+*** 640 b32524 general purpose (wound) page 18 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 27.5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./moq untaped pcs./moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) 400 200 0.68 11.0 19.0 31.5 b32524q6684+*** 1400 1280 1.0 11.0 19.0 31.5 b32524q6105+*** 1400 1280 1.5 11.0 19.0 31.5 b32524q6155+*** 1400 1280 2.2 11.0 21.0 31.5 b32524r6225+*** 1400 1280 3.3 14.0 24.5 31.5 b32524r6335+*** 1000 1040 4.7 14.0 24.5 31.5 b32524r6475+*** 1000 1040 6.8 18.0 27.5 31.5 b32524r6685+*** 800 10 22.0 36.5 31.5 b32524r6106+*** 640 630 220 0.33 11.0 21.0 31.5 b32524q8334+*** 1400 1280 0.47 11.0 21.0 31.5 b32524q8474+*** 1400 1280 0.68 11.0 21.0 31.5 b32524q8684+*** 1400 1280 1.0 14.0 24.5 31.5 b32524q8105+*** 1000 1040 1.5 18.0 27.5 31.5 b32524q8155+*** 800 2.2 21.0 31.0 31.5 b32524q8225+*** 720 b32524 general purpose (wound) page 19 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 37.5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./moq untaped pcs./moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% a = 15 ... +5% (220 m f type only) 000 = untaped (lead length 6 1 mm) 63 40 22 12.0 22.0 41.5 b32526r0226+*** 1620 33 12.0 22.0 41.5 b32526r0336+*** 1620 47 12.0 22.0 41.5 b32526r0476+*** 1620 56 24.0 15.0 41.5 b32526t0566+*** 1040 68 16.0 28.5 41.5 b32526r0686+*** 800 82 24.0 19.0 41.5 b32526t0826+*** 780 100 18.0 32.5 41.5 b32526r0107+*** 720 150 20.0 39.5 41.5 b32526r0157+*** 640 220 28.0 42.5 41.5 b32526r0227a*** 440 100 63 15 12.0 22.0 41.5 b32526r1156+*** 1620 22 12.0 22.0 41.5 b32526r1226+*** 1620 33 14.0 25.0 41.5 b32526r1336+*** 1380 33 24.0 15.0 41.5 b32526t1336+*** 1040 47 16.0 28.5 41.5 b32526r1476+*** 800 47 24.0 19.0 41.5 b32526t1476+*** 780 68 18.0 32.5 41.5 b32526r1686+*** 720 100 20.0 39.5 41.5 b32526r1107+*** 640 150 28.0 42.5 41.5 b32526r1157+*** 440 250 160 4.7 12.0 22.0 41.5 b32526r3475+*** 1620 6.8 12.0 22.0 41.5 b32526r3685+*** 1620 10 12.0 22.0 41.5 b32526r3106+*** 1620 15 14.0 25.0 41.5 b32526r3156+*** 1380 15 24.0 15.0 41.5 b32526t3156+*** 1040 22 16.0 28.5 41.5 b32526r3226+*** 800 22 24.0 19.0 41.5 b32526t3226+*** 780 33 20.0 39.5 41.5 b32526r3336+*** 640 47 20.0 39.5 41.5 b32526r3476+*** 640 68 28.0 42.5 41.5 b32526r3686+*** 440 b32526 general purpose (wound) page 20 of 45 please read important notes at the end of this document.
ordering codes and packing units (lead spacing 37.5 mm) v r v dc v rms f 60 hz v ac c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./moq reel pcs./moq untaped pcs./moq moq = minimum order quantity, consisting of 4 packing units. further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% j = 5% a = 15 ... +5% (220 m f type only) 000 = untaped (lead length 6 1 mm) 400 200 3.3 12.0 22.0 41.5 b32526r6335+*** 1620 4.7 12.0 22.0 41.5 b32526r6475+*** 1620 5.6 24.0 15.0 41.5 b32526t6565+*** 1040 6.8 14.0 25.0 41.5 b32526r6685+*** 1380 8.2 24.0 19.0 41.5 b32526t6825+*** 780 10 18.0 32.5 41.5 b32526r6106+*** 720 15 20.0 39.5 41.5 b32526r6156+*** 640 22 28.0 42.5 41.5 b32526r6226+*** 440 b32526 general purpose (wound) page 21 of 45 please read important notes at the end of this document.
technical data operating temperature range max. operating temperature t op,max +125 c upper category temperature t max +125 c lower category temperature t min 55 c rated temperature t r +85 c dissipation factor tan d (in 10 -3 ) at c r 0.1 m f 0.1 m f < c r 1 m f c r > 1 m f at 20 c 1 khz 8 8 10 (upper limit values) 10 khz 15 15 100 khz 30 insulation resistance r ins v r c r 0.33 m f c r > 0.33 m f or time constant t = c r r ins 100 v dc 3750 m w 1250 s at 20 c, rel. humidity 65% 3 250 v dc 7500 m w 2500 s (minimum as-delivered values) dc test voltage 1.4 v r , 2 s category voltage v c t a ( c) dc voltage derating ac voltage derating (continuous operation with v dc t a 85 v c = v r v c,rms = v rms or v ac at f 60 hz) 85 10% of parameters dissipation factor tan d > 2 upper limit value insulation resistance r ins < 150 m w (c r 0.33 m f) or time constant t = c r r ins < 50 s (c r > 0.33 m f) b32520 ... b32529 general purpose (stacked/wound) page 22 of 45 please read important notes at the end of this document.
pulse handling capability "dv/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in v/ m s. "k 0 " represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in v 2 / m s. note: the values of dv/dt and k 0 provided below must not be exceeded in order to avoid damaging the capacitor. dv/dt values s = stacked, w = wound lead spacing 5 mm 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm technology s s s w s w w w w v r v rms v dc v ac dv/dt in v/ m s 63 40 250 120 50 30 3 1 0.8 100 63 300 150 75 50 5 4 3 1 250 160 400 200 150 100 10 8 5 4 400 200 600 275 175 125 10 8.5 6 450 200 20 630 400 800 320 150 15 12 k 0 values s = stacked, w = wound lead spacing 5 mm 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm technology s s s w s w w w w v r v rms v dc v ac k 0 in v 2 / m s 63 40 30000 15000 6300 3800 375 130 100 100 63 60000 30000 15000 10000 850 800 600 200 250 160 200000 100000 75000 50000 5000 4000 2500 2000 400 200 500000 220000 140000 100000 10000 8500 6000 450 200 15000 630 400 1000000 400000 190000 18000 15000 b32520 ... b32529 general purpose (stacked/wound) page 23 of 45 please read important notes at the end of this document.
impedance z versus frequency f (typical values) b32520 ... b32529 general purpose (stacked/wound) page 24 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 5 mm 50 v dc/32 v ac 63 v dc/40 v ac 100 v dc/63 v ac 250 v dc/160 v ac b32529 general purpose (stacked) page 25 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 5 mm 400 v dc/200 v ac 630 v dc/400 v ac b32529 general purpose (stacked) page 26 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 7.5 mm 63 v dc/40 v ac 100 v dc/63 v ac 250 v dc/160 v ac 400 v dc/200 v ac b32520 general purpose (stacked) page 27 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 10 mm 63 v dc/40 v ac 100 v dc/63 v ac 250 v dc/160 v ac 400 v dc/200 v ac b32521 general purpose (stacked/wound) page 28 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 10 mm 630 v dc/200 v ac b32521 general purpose (stacked/wound) page 29 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 15 mm 63 v dc/40 v ac 100 v dc/63 v ac 250 v dc/160 v ac 400 v dc/200 v ac b32522 general purpose (stacked/wound) page 30 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 15 mm 450 v dc/200 v ac 630 v dc/200 v ac b32522 general purpose (stacked/wound) page 31 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 22.5 mm 63 v dc/40 v ac 100 v dc/63 v ac 250 v dc/160 v ac 400 v dc/200 v ac b32523 general purpose (wound) page 32 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 22.5 mm 630 v dc/200 v ac b32523 general purpose (wound) page 33 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 27.5 mm 63 v dc/40 v ac 100 v dc/63 v ac 250 v dc/160 v ac 400 v dc/200 v ac b32524 general purpose (wound) page 34 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 27.5 mm 630 v dc/220 v ac b32524 general purpose (wound) page 35 of 45 please read important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms, t a 55 c) for t a >55 c, please refer to "general technical information", section 3.2.3. lead spacing 37.5 mm 63 v dc/40 v ac 100 v dc/63 v ac 250 v dc/160 v ac 400 v dc/200 v ac b32526 general purpose (wound) page 36 of 45 please read important notes at the end of this document.
mounting guidelines 1 soldering 1.1 solderability of leads the solderability of terminal leads is tested to iec 60068-2-20, test ta, method 1. before a solderability test is carried out, terminals are subjected to accelerated ageing (to iec 60068-2-2, test ba: 4 h exposure to dry heat at 155 c). since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. solder bath temperature 235 5 c soldering time 2.0 0.5 s immersion depth 2.0 +0/ 0.5 mm from capacitor body or seating plane evaluation criteria: visual inspection wetting of wire surface by new solder 3 90%, free-flowing solder 1.2 resistance to soldering heat resistance to soldering heat is tested to iec 60068-2-20, test tb, method 1a. conditions: series solder bath temperature soldering time mkt boxed (except 2.5 6.5 7.2 mm) coated uncoated (lead spacing > 10 mm) 260 5 c 10 1 s mfp mkp (lead spacing > 7.5 mm) mkt boxed (case 2.5 6.5 7.2 mm) 5 1 s mkp mkt (lead spacing 7.5 mm) uncoated (lead spacing 10 mm) insulated (b32559) < 4 s recommended soldering profile for mkt uncoated (lead spacing 10 mm) and insulated (b32559) b32520 ... b32529 general purpose (stacked/wound) page 37 of 45 please read important notes at the end of this document.
immersion depth 2.0 +0/ 0.5 mm from capacitor body or seating plane shield heat-absorbing board, (1.5 0.5) mm thick, between capacitor body and liquid solder evaluation criteria: visual inspection no visible damage d c/c 0 2% for mkt/mkp/mfp 5% for emi suppression capacitors tan d as specified in sectional specification b32520 ... b32529 general purpose (stacked/wound) page 38 of 45 please read important notes at the end of this document.
1.3 general notes on soldering permissible heat exposure loads on film capacitors are primarily characterized by the upper cate- gory temperature t max . long exposure to temperatures above this type-related temperature limit can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical characteristics. for short exposures (as in practical soldering processes) the heat load (and thus the possible effects on a capacitor) will also depend on other factors like: pre-heating temperature and time forced cooling immediately after soldering terminal characteristics: diameter, length, thermal resistance, special configurations (e.g. crimping) height of capacitor above solder bath shadowing by neighboring components additional heating due to heat dissipation by neighboring components use of solder-resist coatings the overheating associated with some of these factors can usually be reduced by suitable coun- termeasures. for example, if a pre-heating step cannot be avoided, an additional or reinforced cooling process may possibly have to be included. epcos recommends the following conditions: pre-heating with a maximum temperature of 110 c temperature inside the capacitor should not exceed the following limits: mkp/mfp 110 c mkt 160 c when smd components are used together with leaded ones, the leaded film capacitors should not pass into the smd adhesive curing oven. the leaded components should be assembled af- ter the smd curing step. leaded film capacitors are not suitable for reflow soldering. uncoated capacitors for uncoated mkt capacitors with lead spacings 10 mm (b32560/b32561) the following mea- sures are recommended: pre-heating to not more than 110 c in the preheater phase rapid cooling after soldering b32520 ... b32529 general purpose (stacked/wound) page 39 of 45 please read important notes at the end of this document.
cautions and warnings do not exceed the upper category temperature (uct). do not apply any mechanical stress to the capacitor terminals. avoid any compressive, tensile or flexural stress. do not move the capacitor after it has been soldered to the pc board. do not pick up the pc board by the soldered capacitor. do not place the capacitor on a pc board whose pth hole spacing differs from the specified lead spacing. do not exceed the specified time or temperature limits during soldering. avoid external energy inputs, such as fire or electricity. avoid overload of the capacitors. the table below summarizes the safety instructions that must always be observed. a detailed de- scription can be found in the relevant sections of the chapters "general technical information" and "mounting guidelines". topic safety information reference chapter "general technical information" storage conditions make sure that capacitors are stored within the specified range of time, temperature and humidity conditions. 4.5 "storage conditions" flammability avoid external energy, such as fire or electricity (passive flammability), avoid overload of the capacitors (active flammability) and consider the flammability of materials. 5.3 "flammability" resistance to vibration do not exceed the tested ability to withstand vibration. the capacitors are tested to iec 60068-2-6. epcos offers film capacitors specially designed for operation under more severe vibration regimes such as those found in automotive applications. consult our catalog "film capacitors for automotive electronics". 5.2 "resistance to vibration" b32520 ... b32529 general purpose (stacked/wound) page 40 of 45 please read important notes at the end of this document.
topic safety information reference chapter "mounting guidelines" soldering do not exceed the specified time or temperature limits during soldering. 1 "soldering" cleaning use only suitable solvents for cleaning capacitors. 2 "cleaning" embedding of capacitors in finished assemblies when embedding finished circuit assemblies in plastic resins, chemical and thermal influences must be taken into account. caution: consult us first, if you also wish to embed other uncoated component types! 3 "embedding of capacitors in finished assemblies" b32520 ... b32529 general purpose (stacked/wound) page 41 of 45 please read important notes at the end of this document.
symbols and terms symbol english german a heat transfer coefficient w?rmebergangszahl a c temperature coefficient of capacitance temperaturkoeffizient der kapazit?t a capacitor surface area kondensatoroberfl?che b c humidity coefficient of capacitance feuchtekoeffizient der kapazit?t c capacitance kapazit?t c r rated capacitance nennkapazit?t d c absolute capacitance change absolute kapazit?ts?nderung d c/c relative capacitance change (relative deviation of actual value) relative kapazit?ts?nderung (relative abweichung vom ist-wert) d c/c r capacitance tolerance (relative deviation from rated capacitance) kapazit?tstoleranz (relative abweichung vom nennwert) dt time differential differentielle zeit d t time interval zeitintervall d t absolute temperature change (self-heating) absolute temperatur?nderung (selbsterw?rmung) d tan d absolute change of dissipation factor absolute ?nderung des verlustfaktors d v absolute voltage change absolute spannungs?nderung dv/dt time differential of voltage function (rate of voltage rise) differentielle spannungs?nderung (spannungsflankensteilheit) d v/ d t voltage change per time interval spannungs?nderung pro zeitintervall e activation energy for diffusion aktivierungsenergie zur diffusion esl self-inductance eigeninduktivit?t esr equivalent series resistance ersatz-serienwiderstand f frequency frequenz f 1 frequency limit for reducing permissible ac voltage due to thermal limits grenzfrequenz fr thermisch bedingte reduzierung der zul?ssigen wechselspannung f 2 frequency limit for reducing permissible ac voltage due to current limit grenzfrequenz fr strombedingte reduzierung der zul?ssigen wechselspannung f r resonant frequency resonanzfrequenz f d thermal acceleration factor for diffusion therm. beschleunigungsfaktor zur diffusion f t derating factor deratingfaktor i current (peak) stromspitze i c category current (max. continuous current) kategoriestrom (max. dauerstrom) b32520 ... b32529 general purpose (stacked/wound) page 42 of 45 please read important notes at the end of this document.
symbol english german i rms (sinusoidal) alternating current, root-mean-square value (sinusf?rmiger) wechselstrom i z capacitance drift inkonstanz der kapazit?t k 0 pulse characteristic impulskennwert l s series inductance serieninduktivit?t l failure rate ausfallrate l 0 constant failure rate during useful service life konstante ausfallrate in der nutzungsphase l test failure rate, determined by tests experimentell ermittelte ausfallrate p diss dissipated power abgegebene verlustleistung p gen generated power erzeugte verlustleistung q heat energy w?rmeenergie r density of water vapor in air dichte von wasserdampf in luft r universal molar constant for gases allg. molarkonstante fr gas r ohmic resistance of discharge circuit ohmscher widerstand des entladekreises r i internal resistance innenwiderstand r ins insulation resistance isolationswiderstand r p parallel resistance parallelwiderstand r s series resistance serienwiderstand s severity (humidity test) sch?rfegrad (feuchtetest) t time zeit t temperature temperatur t time constant zeitkonstante tan d dissipation factor verlustfaktor tan d d dielectric component of dissipation factor dielektrischer anteil des verlustfaktors tan d p parallel component of dissipation factor parallelanteil des verlfustfaktors tan d s series component of dissipation factor serienanteil des verlustfaktors t a ambient temperature umgebungstemperatur t max upper category temperature obere kategorietemperatur t min lower category temperature untere kategorietemperatur t ol operating life at operating temperature and voltage betriebszeit bei betriebstemperatur und -spannung t op operating temperature beriebstemperatur t r rated temperature nenntemperatur t ref reference temperature referenztemperatur t sl reference service life referenz-lebensdauer v ac ac voltage wechselspannung b32520 ... b32529 general purpose (stacked/wound) page 43 of 45 please read important notes at the end of this document.
symbol english german v c category voltage kategoriespannung v c,rms category ac voltage (sinusf?rmige) kategorie-wechselspannung v cd corona-discharge onset voltage teilentlade-einsatzspannung v ch charging voltage ladespannung v dc dc voltage gleichspannung v fb fly-back capacitor voltage spannung (flyback) v i input voltage eingangsspannung v o output voltage ausgangssspannung v op operating voltage betriebsspannung v p peak pulse voltage impuls-spitzenspannung v pp peak-to-peak voltage impedance spannungshub v r rated voltage nennspannung r amplitude of rated ac voltage amplitude der nenn-wechselspannung v rms (sinusoidal) alternating voltage, root-mean-square value (sinusf?rmige) wechselspannung v sc s-correction voltage spannung bei anwendung "s-correction" v sn snubber capacitor voltage spannung bei anwendung "beschaltung" z impedance scheinwiderstand lead spacing rasterma? b32520 ... b32529 general purpose (stacked/wound) page 44 of 45 please read important notes at the end of this document.
the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application . as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified . in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our ma- terial data sheets on the internet (www.epcos.com/material). should you have any more de- tailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "general terms of delivery for products and services in the electrical in- dustry" published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, deltacap, digisimic, dssp, formfit, miniblue, minicell, mkk, mkd, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trade- marks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks. important notes page 45 of 45

▲Up To Search▲

Price & Availability of B32529C1473

	To Download B32529C1473 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .